Researchers seem to have solved the puzzle of LK-99. Scientific detective work has unearthed evidence that the material is not a superconductor, and clarified its actual properties.

The conclusion dashes hopes that LK-99 — a compound of copper, lead, phosphorus and oxygen — marked the discovery of the first superconductor that works at room temperature and ambient pressure. Instead, studies have shown that impurities in the material — in particular, copper sulfide — were responsible for the sharp drops in electrical resistivity and partial levitation over a magnet, which looked similar to properties exhibited by superconductors.

“I think things are pretty decisively settled at this point,” says Inna Vishik, a condensed-matter experimentalist at the University of California, Davis.

The LK-99 saga began in late July, when a team led by Sukbae Lee and Ji-Hoon Kim at the Quantum Energy Research Centre, a start-up firm in Seoul, published preprints1,2 claiming that LK-99 is a superconductor at normal pressure and temperatures up to at least 127 ºC (400 kelvin). All previously confirmed superconductors function only at extreme temperatures and pressures.

The extraordinary claim quickly grabbed the attention of the science-interested public and researchers, some of whom tried to replicate LK-99. Initial attempts did not see signs of room-temperature superconductivity, but were not conclusive. Now, after dozens of replication efforts, many experts are confidently saying that the evidence shows LK-99 is not a room-temperature superconductor. (Lee and Kim’s team did not respond to Nature’s request for comment.) Accumulating evidence

The South Korean team based its claim on two of LK-99’s properties: levitation above a magnet and abrupt drops in resistivity. But separate teams in Beijing, at Peking University3 and the Chinese Academy of Sciences4 (CAS), found mundane explanations for these phenomena.

Another study5, by US and European researchers, combined experimental and theoretical evidence to demonstrate how LK-99’s structure made superconductivity infeasible. And other experimenters synthesized and studied pure samples6 of LK-99, erasing doubts about the material’s structure and confirming that it is not a superconductor, but an insulator.

The only further confirmation would come from the Korean team sharing their samples, says Michael Fuhrer, a physicist at Monash University in Melbourne, Australia. “The burden’s on them to convince everybody else,” he says.

Perhaps the most striking evidence for LK-99’s superconductivity was a video taken by the Korean team that showed a coin-shaped sample of silvery material wobbling over a magnet. The team said the sample was levitating because of the Meissner effect — a hallmark of superconductivity in which a material expels magnetic fields. Multiple unverified videos of LK-99 levitating subsequently circulated on social media, but none of the researchers who initially tried to replicate the findings observed any levitation. Half-baked levitation

Several red flags popped out to Derrick van Gennep, a former condensed-matter researcher at Harvard University in Cambridge, Massachusetts, who now works in finance but was intrigued by LK-99. In the video, the same edge of the sample seemed to stick to the magnet, and it seemed delicately balanced. By contrast, superconductors that levitate over magnets can be spun and even held upside-down. “None of those behaviors look like what we see in the LK-99 videos,” van Gennep says.

He thought LK-99’s properties were more likely the result of ferromagnetism. So he constructed a pellet of compressed graphite shavings with iron filings glued to it. A video made by Van Gennep shows that his disc — made of non-superconducting, ferromagnetic materials — mimicked LK-99’s behaviour.

On 7 August, the Peking University team reported that this “half-levitation” appeared in their LK-99 samples because of ferromagnetism. “It’s exactly like an iron-filing experiment,” says Yuan Li, a condensed-matter physicist and study co-author. The pellet experiences a lifting force but it’s not enough to levitate — only enough to balance on one end.

Li and his colleagues measured their sample’s resistivity, and found no sign of superconductivity. But they couldn’t explain the sharp resistivity drop seen by the Korean team. Impure samples

In their preprint, the Korean authors note one particular temperature at which LK-99’s showed a tenfold drop in resistivity, from about 0.02 ohm-centimetres to 0.002 ohm-cm. “They were very precise about it. 104.8ºC,” says Prashant Jain, a chemist at the University of Illinois Urbana–Champaign. “I was like, wait a minute, I know this temperature.”

The reaction that synthesizes LK-99 uses an unbalanced recipe: for every 1 part copper-doped lead phosphate crystal — pure LK-99 — it makes, it produces 17 parts copper and 5 parts sulfur. These leftovers lead to numerous impurities — especially copper sulfide, which the Korean team reported in its sample.

Jain, a copper-sulfide expert, remembered 104ºC as the temperature at which Cu2S undergoes a phase transition. Below that temperature, the resistivity of air-exposed Cu2S drops dramatically — a signal almost identical to LK-99’s purported superconducting phase transition. “I was almost in disbelief that they missed it.” Jain published a preprint7 on the important confounding effect.

On 8 August, the CAS team reported on the effects of Cu2S impurities in LK-99. “Different contents of Cu2S can be synthesized using different processes,” says Jianlin Luo, a CAS physicist. The researchers tested two samples — the first heated in a vacuum, which resulted in 5% Cu2S content, and the second in air, which gave 70% Cu2S content.

The first sample’s resistivity increased relatively smoothly as it cooled, and appeared similar to samples from other replication attempts. But the second sample’s resistivity plunged near 112 ºC (385K) — closely matching the Korean team’s observations.

“That was the moment where I said, ‘Well, obviously, that’s what made them think this was a superconductor,’” says Fuhrer. “The nail in the coffin was this copper sulfide thing.”

Making conclusive statements about LK-99’s properties is difficult, because the material is finicky and samples contain varying impurities. “Even from our own growth, different batches will be slightly different,” says Li. But Li argues that samples that are close enough to the original are sufficient for checking whether LK-99 is a superconductor in ambient coniditions. Crystal clear

With strong explanations for the resistivity drop and the half-levitation, many in the community were convinced that LK-99 was not a room-temperature superconductor. But mysteries lingered — namely, what were the material’s actual properties?

Initial theoretical attempts using an approach called density functional theory (DFT) to predict LK-99’s structure had hinted at interesting electronic signatures called ‘flat bands’. These are areas where the electrons move slowly and can be strongly correlated. In some cases, this behavior leads to superconductivity. But these calculations were based on unverified assumptions about LK-99’s structure.

To better understand the material, the US–European group5 performed precision X-ray imaging of their samples to calculate LK-99’s structure. Crucially, the imaging allowed them to make rigorous calculations that clarified the situation of the flat bands: they were not conducive to superconductivity. Instead, the flat bands in LK-99 came from strongly localized electrons, which cannot ‘hop’ in the way a superconductor requires.

On 14 August, a separate team, at the Max Planck Institute for Solid State Research in Stuttgart, Germany, reported6 synthesizing pure, single crystals of LK-99. Unlike previous synthesis attempts that relied on crucibles, the researchers used a technique called floating zone crystal growth that allowed them to avoid introducing sulfur into the reaction, eliminating the Cu2S impurities.

The result was a transparent purple crystal — pure LK-99, or Pb8.8Cu1.2P6O25. Separated from impurities, LK-99 is not a superconductor, but an insulator with a resistance in the millions of ohms — too high to run a standard conductivity test. It shows minor ferromagnetism and diamagnetism, but not enough for even partial levitation. “We therefore rule out the presence of superconductivity,” the team concluded.

The team suggests that the hints of superconductivity seen in LK-99 were attributable to Cu2S impurities, which are absent from their crystal. “This story is exactly showing why we need single crystals,” says Pascal Puphal, a specialist in crystal growth and the Max Planck physicist who led the study. “When we have single crystals, we can clearly study the intrinsic properties of a system.” Lessons learned

Many researchers are reflecting on what they’ve learned from the summer’s superconductivity sensation.

For Leslie Schoop, a solid-state chemist at Princeton University in New Jersey, who co-authored the flat-bands study, the lesson about premature calculations is clear. “Even before LK-99, I have been giving talks about how you need to be careful with DFT, and now I have the best story ever for my next summer school,” she says.

Jain points to the importance of old, often overlooked data — the crucial measurements that he relied on for the resistivity of Cu2S were published in 1951.

While some commentators have pointed to the LK-99 saga as a model for reproducibility in science, others say that it’s an unusually swift resolution of a high-profile puzzle. “Often these things die this very slow death, where it’s just the rumors and nobody can reproduce it,” says Fuhrer.

When copper oxide superconductors were discovered in 1986, researchers leapt to probe their properties. But nearly four decades later, there is still debate over the material’s superconducting mechanism, says Vishik. Efforts to explain LK-99 came readily. “The detective work that wraps up all of the pieces of the original observation — I think that’s really fantastic,” she says. “And it’s relatively rare.”

doi: https://doi.org/10.1038/d41586-023-02585-7

  • SIGSEGV@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    70
    arrow-down
    1
    ·
    1 year ago

    Yay! Glad they finally put this to rest. I was hopeful but extremely pessimistic about it, and now we know.

    It’s so cool to me how many specialists we have around the world, like Jain (the copper-sulfide expert). That’s such a very specific thing to be an expert about.

    In my work in devops with a start-up, I’m expected to know a bit about everything. I’m a bit jealous of Jain’s extremely narrow focus, lol.

    • Phlogiston@lemmy.world
      link
      fedilink
      English
      arrow-up
      15
      arrow-down
      1
      ·
      1 year ago

      And to make matters worse I’m not spending free moments learning more and more computer science — but am instead reading internet stuff about material science. I can enjoy my wide ranging brain but agree that sometimes I wish I was more focused.

      • sab@kbin.social
        link
        fedilink
        arrow-up
        11
        ·
        1 year ago

        I’m doing a PhD, so hang out a lot with researchers - though not in natural sciences. Still, in my experience, the best researchers are often those who engage with other hobbies on the side. They’re often very specialized within the field, but can have all kinds of hidden talents and interests. It keeps your brain fresh.

        So don’t feel bad about pursuing your interests! Sometimes it’s also unexpected combinations of knowledge that is valuable, not hyperspecialization in one specific field. :)

      • serialandmilk@lemmy.ml
        link
        fedilink
        English
        arrow-up
        8
        ·
        edit-2
        1 year ago

        Kudos to having wide-ranging interests. We need both types of people (and many many in between) to survive and progress in this world together :)

        • SIGSEGV@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          5
          ·
          1 year ago

          I like this take. Being a jack-of-all-trades means I always feel like I’m not good at anything. It does take all kinds to make the world go 'round, though.

          My hobbies are almost exclusively outdoors activities. I want to be as far away from a computer as possible when I get off work.

        • Buddahriffic@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          I agree. When you have two specialized areas that need to work together, someone who is a generalist in both of them might see things that specialists in both areas might miss due to a lack of understanding of the other part.

      • EnglishMobster@kbin.social
        link
        fedilink
        arrow-up
        6
        ·
        1 year ago

        To be fair, you don’t get to be an expert at something by just reading about it. You become an expert by immersing yourself in it and knowing all the nuanced details of what you specialize in.

        For example, I’m a AAA gamedev programmer. My specialty is the Unreal Engine. I know tons of little quirks about the engine that many of my coworkers don’t - but that’s because I’ve been using the engine for over a decade at this point.

        I don’t devote every waking moment to learning about Unreal - I used to spend a lot of free time researching it before I got hired, but now I leave gaming stuff at work to avoid burnout.

        You don’t need to like hyperfixate on something to become good at it. You just need to work on it for long enough - and if it’s literally your job, you’ll spend 40+ hours/week engrossed in it, for years.

    • rustyricotta@lemmy.ml
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      It reminds me of the book “Hail Mary” where the entire world’s smartest people and specialists come together to solve humanity’s problems.

  • InvertedParallax@lemm.ee
    link
    fedilink
    English
    arrow-up
    17
    arrow-down
    1
    ·
    1 year ago

    So, it was clear once the synthesis became public that this was BS, but we haven’t reached complete scientific consensus yet.

    Can we please finish the process? I’m tired of influencers and marketing suits trying to steer scientific discourse, it does nobody any good.