The problem with brushing on resin is actually not that great because resin for printers will need to be cured. Unless that material is letting the UV light through, only the outer parts will get cured and hold onto the models but when you open it up again the whole middle part would be liquid resin again which stinks and is toxic.

I had this misunderstanding for quite a while myself and though that I can just weld resin party with resin together until I did that with a larger piece and it broke quite easily and seeing that the whole inside wasn’t even touched at all by the UV light.

Hence also why you should shine some UV light into a hollowed model to fully cure it.

CA/superglue should do fine if applied correctly.

I don’t know where I read it but IIRC religion is being used as a simple answer to very difficult and possibly uncomfortable questions: why are we here and what is our purpose?

It is fairly easy to believe that something, a god, created us instead of that the existence of humanity was just a fluke, a stroke of luck enabling us to evolve were we are now because it is just easier to grasp even if it is proven. That we evolved from simple beings into more complex organisms instead of just “being created”. Evolution creates so many quite difficult questions that it is easier to understand and believe that someone just wanted us to exist.

When someone is believing in a religion they also always have some form of " it won’t be over" scenario like when you die, there is nothing truly “the end”. You just won’t vanish and this can be terrifying for many because the following question could be, what sense does it make to live at all when our existence is just so insignificant in comparison to everything else?

So, in short, it is an easy too to make sense of things that almost everyone can understand it.

Unfortunately, things like this can and will be abused.

OP wants to connect a Resin print to a PLA print, not two Filament-printed models together!

Well, i mean i would be all for that but in reality it might not be that easy. It could rely on dependencies that are proprietary that cannot be shipped or provided with the project.

It could alone be that the connection is hard coded in the game itself so instead of just booting up the server and being able to play you would now have to do something to the game itself too that it finds your server. Nothing really that cannot be addressed, I mean people could do that with ragnarok online private servers but not something your normal gamer could do.

Probably depends on the background as well. They could have hardware running (multiplayer server) that gets so little activity that there is no benefit and only loses them money.

It also doesn’t look like the game has steam integration.

Connectivity or rather the lack of it…

I have a Samsung TV and recently got a new cooling fan and now when I start the fan when my TV is on, it says it detected a new device. I don’t know what my TV would want with a fan maybe control the speed for more immersion?

But there is also no way for me to disable that. I also got regular requests of my neighbor’s to connect to my TV until I disabled the notification for it. No, I couldn’t disable that my TV doesn’t even allow it to be seen, I had to enable to not automatically connect devices and disable that notifications are being shown. That thing isn’t even connected to the internet.

Depends. I recently was in that situation and it was easier and more cost-effective to just print them.

I recently bought some Lego Star Wars sets and printed out some Display stands for them but the connection between the stands and the model was expected to be a 2x4 Lego plate. I didn’t have those plates at hand so I looked online and found it from the official Lego site.

The individual “Plate 2x4” would cost 0.14EUR each. Since I needed 3 this would be 0.42EUR. But the mailing costs would be over 9EUR.

So ordering 3 of those Lego pieces would cost me almost 10 bucks. I just printed them out which worked well, they were a bit tight fit but are still holding.

But I wouldn’t necessarily say that this is a replacement for actual Lego pieces. As a quick alternative that you can’t see or that has less interaction with other pieces (doesn’t need to fit correctly on all sides) then I think this can work.

so, sooo much.

I currently print some stands for some Lego spaceships. I also have over a TB of models from various Patreons that I support accumulated over the months. I also always find new ones I want to print, but rarely find the time to ACTUALLY print something, anything…

Yeah. The general speed that you set isn’t necessarily the speed that your printer will print at. That might be the max speed you might get in the best situation or location.

For example, depending on the settings, first layer, outer walls, bridges and other parts of the model cann all be printed at a lower speed to preserve quality. Your print head also needs to accelerate and decelerate for every corner so that it doesn’t overshoot and go where it should. So low acceleration/deceleration play also a part. And the model itself has to be considered in this too because long, mostly straight lines can accelerate to that speed and stay on it for longer.

So what you set as “speed” in the slicer is mostly not what you actually get. Some slicers have a speed display with a colour gradient after you sliced it so that you can see which parts are faster or slower.

The only thing you can really do about it is to do test prints and slowly push the speed up as far as you can to get a decent quality at a nice speed. But you can still end up in parts where you would be fairly slow.

So this is just for the “looks” or am I missing something here?

Doesn’t seem to do anything for adhesion which I wouldn’t consider to be a replacement as the title implies it is…

Unless, of course, you are looking for a different bottom surface finish.

As long as people pay for it and they make massive profits through it.

I mean, look at the last situation in which netflix addressed account sharing. Their user number actually increased because of it from what I have read.

Those people that can’t afford it will most likely switch to a less expensive tier and then probably see ads. I have seen that recently with my father who wasn’t even bothered or annoyed by the constant ads while watching a single episode.

Yes, something like this I was thinking about. A boom arm or pole or something like that would then reach over the printer and the retractable badge holders could hold the cables and feed tube up without interfering with them that much.

I specifically moved the filament feed tube to the front so that the whole thing is more accessible and easier to handle, by default the whole stuff is at the end but I found it too annoying to always have to grab/reach through my printer under the bed to do anything with the filament.

I did try using a spare PTFE tube for the cables but this didn’t really help that much. But I must say, I have fewer issues with the cables, the filament feed tube is more of an issue I want to address.

Yeah, I have seen this and played with that Idea for a while but never really could find something that would fit or work with how my setup is constructed. Since I have an Exoslide, custom shroud and so on, those Cable Chains are mostly designed for stock parts.

And I am by far not skilled enough to make the adjustments or remix those things myself.

Thanks, I added an image link to the original post.

I use a pihole which is a small computer that checks every domain request and blocks them when they are on one of my blacklists. This works great for browsing the web because you just don’t see most ads anymore. I also use adblocks for, for example, YouTube because pihole can’t distinguish between ads or legitimate requests when they come from the same domain.

I also download all videos from YouTube to watch. And I also don’t have cable.

Basically, I see so few instances of ads anymore that any few ads are getting so annoying. The 1-2 ads in front of a YouTube video or in the middle, I just don’t watch that video anymore.

But when I really noticed that was when I was spending the day with my father and we were watching a TV show on some free provider, every 10 minutes there were 1.5 minutes ads. Which is by far better as normal TV in my country (Germany) but damn, this was really annoying after just a single episode and I’m glad I don’t have to see those at home. It just interrupts the flow.