There’s a feature to allow charging from USB ports while a computer is off, Lenovo calls it “Always on USB.” That feature is constantly using power even when nothing is plugged in. To test if any ports have that feature power off the computer then try plugging in a simple 5v 500ma usb device to charge. If it starts charging then it has that feature and will drain power. If no options to disable in BIOS then as far as I know stuck :(

I’ve worked on a couple recent gen refurb laptops (dell and lenovo) with that feature but lacking any disable option in BIOS. I’ve tried to get into the habit of plugging in whenever not being used but still end up with things empty more often than I like. Very frustrating and I think only hope is future bios update to give that option.

What are max print speed and volumetric set to?

For some filaments (silk PLA) I’ve had to slow things down (120mm/s max print speed and 10mm3/s max volumetric speed) or it comes out horrible. Only used 0.4 nozzles so far though.

On ‘Startup’ section, what options are available for ‘Boot Mode’ ? May want to try using something other than Quick during OS install. Should be able to change it back afterwards for faster boots.

Slicers for FDM are open source and lots of forks. The built-in printer profiles vary a lot but can be created from scratch. You can find lots online to use as examples too. I currently use Cura, Prusaslicer, and Orcaslicer.

I’m more interested in printing plastic than tuning/upgrading the printer itself so I recommend a printer with automatic z-offset and bed leveling. Basic maintenance tasks such as cleaning, oiling, and greasing will need to be done on occasion no matter the printer. Beyond that I’ve only done simple retraction tuning.

I started with Elegoo Neptune 3 Pro. Klipper firmware upgrade improved speeds a lot. It wasn’t bad for a budget printer but lack of automatic z-offset can be frustrating so I replaced & gave it away to friend. Replaced it with Creality K1 which was a lot easier to get started with thanks to automatic z-offset calibration. Output quality is good but to get better would require upgrades + tuning. Been saving up to replace with Bambu Lab P1S combo so I can also do multi-color printing.

I swapped out delta fan a few months after release, agree fairly straightforward. Upgraded the nvme ssd to 1tb sometime before replacing with OLED model.

I’ve had good luck with refurbished Dell laptops. My primary laptop is a refurbished Dell Latitude 11" 3120. Bought it for ~$250 at beginning of this year and currently have Fedora on it. It’s not very powerful. I use it primarily to browse the web, watch movies/tv, and vnc/ssh to my other systems. Can last about 5-6 hours streaming video from jellyfin at 50% brightness, other stuff barely uses any power and can stretch out to 9-10 hours if I set display brightness even lower.

I’ve always bought Windows laptops then put linux on them so I’m used to verifying that tools such as TLP are installed, configured, enabled, and working. There is too much variety with laptops for all of them to be handled automatically unfortunately so I always verify it. If a laptop came with Linux pre-installed then it might be good to go ootb but I’d still verify.

Quick way to check if a program is using hardware video acceleration is with a gpu top utility.

Intel - intel_gpu_top

Nvidia - nvidia-smi / nvtop

AMD - radeontop / nvtop / amdgpu_top (just did quick search, don’t have any AMD powered on to verify)

For steamdeck on the couch something like the xreal or rokid would be better. Some people have been able to make VR work with steamdeck with bad performance but they only tried VR games so don’t know how it would be with regular games.

I bought a pair when they were still going by NReal name and they worked well with steam deck and my laptop. Battery life would last longer with only the glasses on. I didn’t like always having to wear contacts so picked up a pair of Rokid’s glasses too. Those have built in diopters and have been working well.

They still build recommendations even if you’re not logged in, you can see them in the sidebar after you load a video. Imo they only removed them from the homepage to try convincing people to log in or create account, it’s all about increasing user numbers, ad engagement, and data collection these days.

Does TrueNAS have a web UI that works well on mobile browsers for file download and upload? If it does then could probably use for simple scenarios.

EndeavourOS on desktop and laptop side of things.

For the OS side a few ways.

• Clone & then rename+change drivers
• Ansible/chef
• NixOS

For home folder side of things a dotfile manager, cloud services, and file sync tool will take care of most things. I use chezmoi for dotfiles & nextcloud for file syncing. Firefox is only cloud synced service I still use for now. I have yet to find any decent sources of information on dotfiles so gonna be stuck going through those stupid things to figure out what you want to sync.

My mother used to regularly do photo albums with family photos before we all went digital so I’ve been looking for a solution for years. Nextcloud has been decent with a few apps installed. Only done a couple small albums & worked for my needs. The face detection is alright but cheap cameras, blurry photos, and random mix of internet saved photos doesn’t help, lol. The map view works really well for photos with GPS data. I have my phone setup to automatically upload all new photos to Nextcloud too. Lately been working on plans to share access with my family over zerotier so they can view and upload their own to share back with me.

Yes, my order status has been at preparing to ship for awhile now. I been wanting a good Linux tablet to replace aging iPad and hoping this works well enough for me. I’ll try to remember to update post on how I like it when it does arrive.

I started with Slackware around 1997 because I needed a free C compiler plus all I had were junk, hand-me-down computers. Stopped programming & using linux around 2000 and had switched back to Windows on a newly built, decent computer. From about 2000 until about 2016 I rarely used linux besides a couple routers. Raspberry pi 3 came out with built-in wifi & my dislike of Windows 10 got me back into linux for more use cases. Valve’s work on proton finally made it so I could switch to linux for most gaming & my Windows usage dropped to almost nothing. Currently using Manjaro on primary desktop and Fedora 38 on tablet with mix of distros in LXC & VMs on mini-PC w/ Proxmox VE & Synology NAS. SteamVR on linux been getting decent amount of work on it lately so once it gets stable I’ll have one less reason to need Windows.

It’s Debian-based so can install all the same desktop and window environments available there.