Not an IP lawyer, (those people are EXPENSIVE), It’s perhaps less about the idea than it is about the process to get there. And yes the patent office does make mistakes at times. It’s just expensive and hard to correct those mistakes because it generally takes a judge to do so. And I’m willing to bet this patent is valid in the EU also due reciprocity agreements and trade deals. It would take an EU judge to invalidate the patent, which would cost as much as doing so in the US.

One thing that I have learned over the years is that no patent is actually really valid until a judge bangs a gavel and says yea or nay to the patent, (I’ve held a couple). Until then, it pretty much just a piece of ass-wipe paper you can wavy around and hopefully scare off others that don’t have the money or want to spend the money to challenge the patent.

Vi or die!

At some point the toys would fail, they were 8 and 9 year olds after all, but it could take a month or more in the hands of children. I was pretty shocked. I did have a paper wad cannon that had a spring that was printed all in one inside the barrel. The first few had issues with the compression spring breaking when over compressed by the kids. But a bit of a redesign of the spring by making it beefier, it not only lasted nearly the whole school year but the kids got more range. Much to the other teachers and parents disappointment.

I’ve Printed LOTS of PLA living hinges and even springs. They do work just fine for the limited to moderate cycles they last. I’ve printed 100’s of toy catapults and other small toys in PLA and then handed them out to 8 and 9 year old children. They held up amazingly well under that abuse.

Like the Linux kernel, the cow is merely a means to an end in this example.

Been there, done that, and nope.

Orca has it’s charms for sure. I really like the scarf joint. But PursaSlicer still gives me the cleanest prints. But it’s drifting away from my trusty old and well used Mk3s+.

Kind of like the butcher who got his hands dirty cutting a steak and then a Michelin star chef cooking it for you.

One got his hands bloody. The other made it delectable for you to eat.

Which is more important to the process?

Yes, dictatorships and monarchies sometimes have a petition process, but they tend only to pay lip service. Not because they care, they will do as they please becaue they have the power-- hence a dictatorship. See: North Korea or a few countries in the middle east. Imagine trying to petition the Afghani government as a gay or worse, a trans person.

Governments of any kind are large and ponderous beasts. They cannot change direction as easily as you would like. And like it or not, there are rules and processes that must be followed to make changes. And those things are in place to provide continuity in government and protections to the populace at large. Imagine how much more damage trump could have done without those processes and rules. Imagine what he could do if he wins again after the last SCOTUS ruling.

Like it or not, Biden is bound by a lawful treaty ratified and codified by congress a long time ago. He cannot undo that treaty on a whim. Only congress can do that at this point. Make your changes there. And representatives and senators are local elections and not national. Best of all, YOU could be the change you want. Don’t expect someone else to do it for you.

But it IS the process to get it done. I never said it was ideal. If you don’t like the process, then vote for those that WILL change the process. But that takes time. Until then, we ARE stuck with the laws we currently have in place. That is the reality of the situation. I hope this helps you understand representative democracy vs a dictatorship.

I’ve never really liked the UI in LibreOffice either. It’s usable, but always felt clunky to me. And it feels so heavy and ponderous to use. That says something from someone who wears the sackcloth and ashes of FreeCAD…

I did use OnlyOffice for a bit and I thought it was better for my needs than LibreOffice. But it was still overkill my current needs. So now I’m down to just AbbyWord and Gnumeric since I only need the odd document and simple spreadsheet.

Edit for missed word

Or more likely, Chrome browser these days…

I have taught an introductory course in 3D CAD in my local high school. The sheer number of kids that have no clue on how to use a simple mouse is astounding. If it ain’t touch screen, they are clueless.

Ding! Ding! Here is the correct answer.

I’m beginning to think that liberals and lefties have no clue how government works and they want a strongman/dictator as much as the magahat idiots. They just want one that aligns with their beliefs instead.

The POTUS is NOT all powerful and can make what ever decisions they want. Controlling the house and senate is far more important than whoever is living in the White House. The House and Senate writes the laws and checks to pay for everything. AND they ratify the treaties making them formally binding.

If you want to stop the genocide, elect the people in the house and senate that will effect the actions needed to make it happen.

Concrete lathes are far from a new idea. During WW1, the US needed more lathes than we had. It could take years for a cast iron casting to age enough sitting outside before you could do the final machining to actually build a lathe.

So concrete was tried as a substitute for cast iron. It has some good properties, it cures quickly, is rigid enough, and dampens vibrations pretty well. The downsides are you require a physically larger machine that takes up more floor space, and they are difficult to move making resale difficult, and they don’t last as long in that usage, so they aren’t cheaper in the long run.

Concrete lathes had their day and quickly died out to be forgotten.

I think Win 8 was a YMMV release. I used it heavily for work, (CAD/CAM) and it ran very well. With no more issues than one expects to get from /windows.

Lutefisk. Served with heavy cream and melted butter. And Potato Klub as a side.

I leave it the reader to google it - if they dare.

If you are using Bamboo slicer, you are pretty much using Prusa slicer since it’s directly taken from that with minor changes. I’ve noticed I’ve been slowly migrating away from Prusa slicer, a fork of Marlin, to Orca slicer - which is a fork of Bamboo. The reason is Prusa slicer is now concentrating on updating for the new Mk4 and XL printers with a nod to the Mini. I’m still quite content my Mk3s+ and don’t need all those new updates for printers I don’t own.

Yeah as with any new gotta have technology, there comes a point where a great weeding out of less than efficient providers happens. And it’s been happening to many 3D companies for a while now.

There has been an effort improve the usability of the GUI. And a pointed effort to create a unified and default assembly workbench that actually works, (it seems off to a good start). Some improvements to the CAM workbench and several others. But much of what other things have been done are relatively minor like improving the solvers ability to create fillets and chamfers without failure.

But honestly, Ondsel has been very open that the main goal with the 1.0 release is the TPN resolution and far less about new features.