According to the best school playground scientists of the time, opening a packet of crisps upside down (i.e. so the branding/writing is upside down, and you open the bottom of the packet, at the top) actually “made you gay”.

It wasn’t just gay if you did it, but it would literally cause a spontaneous eruption of gayness in whoever did it - who would be permanently gay from that point onwards.

In the 1990s in the UK, it was gay to wear a backpack using both shoulder straps (as opposed to using one strap over one shoulder, which was the heterosexual way to carry things to school).

I genuinely didn’t realise that! It looked like they were missing, and just had the little nubs underneath.

Would you perhaps like to imagine they were missing, if only for the sake of my previous comment? :)

How often do you write the word “wads”? I can see a potential problem.

All three of ours play fetch, but only with specific objects. They’re all brothers about 2½ years old.

The tabby cat plays fetch with fluffy toy balls with feathers on them, the grey cat plays fetch with spare cat collars and the little black cat plays fetch with menthol sweet wrappers.

Also used to make Mummy Brown Paint (wikipedia link)

… “étoile de mer”, which would roughly translate as “star of the sea” or “sea star” - the same as the Spanish “estrella de mar”, Portuguese “estrela do mar” or Romanian “stea de mare”.

I miss lovely, earthy, warm, friendly chocolatey Brownbuntu.

I always felt purplebuntu was a bit vile.

Kup from 80’s Transformers

I might be wrong, but wasn’t Movit just for timeline preview, and hadn’t worked properly for quite a few versions and now you just use the NVENC/VAAPI etc export profiles to export with GPU?

I’m sure it’s not possible for everyone - but I essentially did this some years back - though more with Premiere than Photoshop - and therefore more Cinelerra/Kdenlive than Gimp/Krita.

I ran a dual boot system from about 2008 until about 2015. If it could be done in Linux/FOSS, it was. If it couldn’t, it was done in Windows/Adobe software.

I was self-employed, though I often did subcontracting work for a handful of media/umbrella organisations - so sometimes I had to use Premiere or Sony Vegas to carry on half-done projects I was handed.

Bear in mind this was when you bought Adobe software and didn’t rent it - and you could also keep running an older version for years.

Anyway, over time I used the Windows partition less and less, until I got rid of it entirely when I got a new computer.

I had to work a bit harder one year, and I did miss out on a few projects - but mostly, I could do everything I could do previously, but it took a bit longer for a while until I adjusted to a different workflow.

After that, you’re just saying “That’s a £2000 job”, “That’s a £200 job”, and meeting a deadline. Nobody really cares if it took 7 minutes longer to do, and I saved a lot of time not using Windows any more.

Editing (and other design stuff) is a far smaller part of my overall work these days, but I still do a good chunk of projects over the year, and I’ve been 100% Linux for almost 10 years. No regrets.

That’s brilliant! Are there any other songs which do similar?

You just understand them in your own way.

When this first came out, we interpreted it as:

Who? Who has? Who has fish? Who has fish from France?

To a degree, yes, but don’t expect magic. Some laptops have a waterproof membrane under the keyboard, so if you’re lucky, and it does, you may be able to just pop the keys off and dry the membrane out, and make sure no liquid creeps round the side into the electronics.

Otherwise you may have better odds if you open up the case and mop up any/all loose liquid you can get to with a microfibre cloth, as soon as possible, then try and let it air dry for a while.

A sealed bag with dried rice and your electronic object may absorb a bit of leftover moisture, but only to the extent that it will equal the moisture level in the sealed bag - the dried rice will gain a little extra moisture, the object will lose that bit of extra moisture.

Try to resist the urge to turn it on to check if it’s working until you’ve got all the moisture out.

It’s a good plan for a more professional setup, but in this distinctly unprofessional setup, if I did it remotely, I wouldn’t get my chat and a cup of tea and biscuit :)

I can’t personally, but I’ve installed/set up Linux systems for quite a lot of older people, and I think only one of them ever uses the terminal for anything. The rest just… use the computer.

On the whole, they’re pretty much just using Libreoffice, Firefox and a few other bits these days. If something needs the terminal to fix, we’re already past the point where they’ve phoned me to pop round and fix it.

These used to be Ubuntu systems, but I switched them all to Mint after having endless Snap permission problems with printers, USB sticks and other peripherals. Once up and running, it’s pretty low maintenance.

I guess they don’t need to use the terminal, because I’ll go and do it if it’s necessary - but we are looking at once every few years. Not a lot of tech support needed.

On my own machine, I probably use the terminal every day.

So… on average late 30s/early 40s? So it’s actually a Lemmy post, rather than a Reddit post?

Yes, but only for the specific game ID folder. Do not delete the whole compatdata folder!

I know you wrote “game id” at the end, but it was written inside “<” these, and for some reason that didn’t display on Jerboa. I had a horrible vision of someone else having the same issue and following along without seeing that bit.

In response to your update, the individual setting with the program is a sort of “override” to the defaults.

If you go into:

Steam menu at top > settings > compatibility

You should see options for:

• enable steam play for supported titles
• enable steam play for all other titles
• run other titles with [proton 8.0-5]

To the best of my knowledge, any title which is pre-checked by Steam (and has a green tick or whatever) is covered by the first option - this will automatically install and run using the version of Proton it was first confirmed to run with. If it ran fine with Proton 3.0-0 or whatever when it was first tested, it possibly still uses that version. Some certainly get rechecked with newer versions. It’s worth noting this is confirmed to work on Steam Deck (with its AMD graphics) - sometimes the default checked version will not work so well when you play on the desktop.

The second option allows you to set a default Proton version for all other titles - if you’ve not adjusted this, it’s possibly set on an older version.

You can override this on a game by game basis (as you have been doing already) - for example, on some games, steering wheel controllers work on 6.3-8, but not the newer version 7/8 etc. So my default is everything runs on the newest Proton, except I override some driving games to run on an older version.

[Edit]The point of this being, Cyberpunk, as a confirmed working game, will have defaulted to the version which works with the Steam Deck, without you doing anything (Leaving the “run with steam play” unticked) - that version may not be best suited to a desktop/laptop running Nvidia graphics. Changing the version manually overrides the default version… and I hope it’s all working well for you :) [End edit]

There’s a brilliant and in depth guide on the gamingonlinux website, which is definitely worth a read if you’ve got time: Gamingonlinux Steamplay guide

For trying to get back into your computer, as squid_slime mentioned, check the CTRL+ALT+F1, CTRL+ALT +F234567 etc first, and see if you’ve still got any control over the computer.

If you get a terminal, you may be able to run “top” to show you the top processes currently running, then CTRL+C to close top, look at the ID of Cyberpunk (if it’s still running) i.e. 12345, then run “kill 12345”.

After that you may be able to get back to your desktop - may be CTRL+ALT+F7, but could be any of the F keys really. You may have to go back and kill some other wine/steam processes. If the system is fully frozen, this won’t work.

The other thing to look at is to see what the logs say - I can’t remember if Ubuntu includes a log viewer by default these days, but you can easily get one from your Software Centre (or you can rummage around in var/log if you’re into that kind of thing).

Anyway, in a GUI log viewer, you should be able to see some system logs from when the program was shut down (a drop down menu at the top normally lets you select a time period) - these may help for searching i.e. “why has my Nvidia driver fallen off a bus?” rather than “Cyberpunk crashes my computer when it closes” - because the same error will have probably happened with other programs you’re not familiar with.

Also, when I’ve had these crash-on-close in the past, it was quite often an NVidia thing, and it sorted itself out a few updates later.