I use all 3 !!!

Redundant power supply too!

Wait! Is the backup power supply compatible?

I like multiboot. Used it back when I used Windows.
The Ventoy advertisements on Reddit looked too suspicious, so I never checked it out.

sugar-crash-wise

I meant the same thing. Spices are more than just taste.

And I seldom put sugar in my lemonade.

The rice seems to do the job

VSauce ⇒ orange = brown

Guess who’s orange

garbanzo

Bad site, but good info. Use the reader view

I end up feeling like absolute garbage.

Maybe, not cooking it well enough? Try changing your recipes, perhaps? Maybe more variety in spices?
Gram, pulses and dried beans (rehydrated before eating) with rice, tend to make my favourite recipes
and even though I use milk products, I feel pretty good even if it is lemonade with black-salt instead.

I hear what I say and it feels unpleasant.
Also, I don’t like adding senseless* words in my speech.

* Unless it’s funny or sth.

I see. When using X11, I was using xinput to set MMB scrolling, but at that time, it had the problem of activating the MMB paste function, if I didn’t click and hold properly.

Over time, my habits changed and I kinda stopped using it. But maybe I’ll try again once it comes in Plasma 6.2 (it’s actually in beta rn)

It’s probably just an alternate pronunciation.

Considering that country names are different in different languages, I don’t see much of a problem with it.

If the last sentence made you go “?” Check the

• Chinese language name for China
• Japanese name for Japan
• Indian language names for India
• But also what China, Japan and India have names for other countries and even alternate names for historical personalities in their languages. In some cases, even regional languages will have other alternate names.

Firefox will still cause a paste though, so you have to disable it separately over there.

As an “arch btw” user, you should know, you need to configure your stuff yourself.
Otherwise, you’re just an arch user.

KDE once made it easier with a GUI https://pointieststick.com/2024/07/05/this-week-in-kde-autoscrolling/
This should be coming in 6.2, I suppose. Until then, you can do it with libinput

I wish that worked everywhere, but it doesn’t.

Unless you’re on Linux

Next Up
Windows Server license on MS Windows Activation server has expired…

What if they got hashed by that cobalt system :P

As a treble lover, I tend to have problems with low bitrate and lossily compressed stuff.
But from what I have seen heard, as long as the quanta are fine enough, the resultant regenerated audio tends to be close enough to the original. Of course, the components of the sound card matter, when you get to extreme clarity levels, but I guess my ears are not fine enough for that.

Well guess what? That was an e-book and you only get to read once.

Hey, if the grid is fine enough…

And more de-obf:

#include <stdio.h>

const char addarr1[]
	= { 0x40, 0x40, 0x0,  0x40, 0x40, 0x40, 0x40, 0x0,  0x40, 0x40, 0x40, 0x40,
		0x0,  0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x0,  0x40, 0x40, 0x40, 0x0,
		0x40, 0x0,  0x40, 0x40, 0x40, 0x40, 0x40, 0x0,  0x40, 0x40, 0x0,  0x40,
		0x40, 0x40, 0x0,  0x40, 0x40, 0x40, 0x40, 0x0,  0x40, 0x40, 0x0,  0x40,
		0x40, 0x40, 0x40, 0x40, 0x40, 0x0,  0x40, 0x40, 0x40, 0x40, 0x40, 0x40,
		0x40, 0x40, 0x40, 0x40, 0x0,  0x40, 0x0,  0x0,  0x40, 0x40, 0x0,  0x40,
		0x40, 0x0,  0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x0,  0x40, 0x0,  0x40,
		0x40, 0x40, 0x40, 0x0,  0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x0,  0x0,
		0x40, 0x0,  0x40, 0x40, 0x40, 0x0,  0x40, 0x0,  0x40, 0x40, 0x40, 0x40,
		0x0,  0x0,  0x40, 0x40, 0x40, 0x0,  0x40, 0x40, 0x40, 0x40, 0x0,  0x40,
		0x0,  0x40, 0x40, 0x0,  0x40, 0x40, 0x40, 0x40, 0x0,  0x40, 0x40, 0x0,
		0x40, 0x40, 0x40, 0x40, 0x0,  0x40, 0x0,  0x40, 0x40, 0x40, 0x40, 0x0,
		0x40, 0x40, 0x40, 0x0,  0x0,  0x0,  0x0,  0x0 };

const char addarr2[]
	= { 0x9,  0x26, 0x20, 0x39, 0x2f, 0x35, 0x32, 0x20, 0x2c, 0x2f, 0x36, 0x25,
		0x20, 0x2c, 0x25, 0x34, 0x34, 0x25, 0x32, 0x20, 0x29, 0x33, 0x2e, 0x27,
		0x34, 0x20, 0x27, 0x29, 0x36, 0x25, 0x2e, 0x20, 0x29, 0x2e, 0x20, 0x34,
		0x28, 0x25, 0x20, 0x26, 0x2f, 0x32, 0x2d, 0x20, 0x2f, 0x26, 0x20, 0x28,
		0x29, 0x27, 0x28, 0x2c, 0x39, 0x20, 0x2f, 0x22, 0x26, 0x35, 0x33, 0x23,
		0x21, 0x34, 0x25, 0x24, 0x20, 0x3,  0x2c, 0x20, 0x29, 0x33, 0x20, 0x29,
		0x34, 0x20, 0x32, 0x25, 0x21, 0x2c, 0x2c, 0x39, 0x20, 0x21, 0x20, 0x2c,
		0x2f, 0x36, 0x25, 0x20, 0x2c, 0x25, 0x34, 0x34, 0x25, 0x32, 0x3f, 0xa,
		0x9,  0x20, 0x24, 0x2f, 0x2e, 0x27, 0x34, 0x20, 0x2b, 0x2e, 0x2f, 0x37,
		0x2c, 0x20, 0x22, 0x35, 0x34, 0x20, 0x37, 0x28, 0x21, 0x34, 0x20, 0x9,
		0x20, 0x24, 0x2f, 0x20, 0x2b, 0x2e, 0x2f, 0x37, 0x20, 0x29, 0x33, 0x20,
		0x34, 0x28, 0x21, 0x34, 0x20, 0x9,  0x20, 0x2c, 0x2f, 0x36, 0x25, 0x20,
		0x39, 0x2f, 0x35, 0x21, 0x20, 0x3c, 0x33, 0xa };

int main ()
{
	for (int i = 0; i < 152; i++)
	{
		char adder1 = addarr1[i];

		char adder2 = addarr2[i];

		char to_print = (char)adder1 + adder2;

		printf ("%c", to_print);
	}
	return 63;
}

I guess I should have kept the recursion and straightened it out in the next step, but now that it’s done…

The next step will just have an array of the characters that would be printed, so I’ll leave it here.

Here’s it with some amount of de-obfuscation:

#include <stdio.h>
short i = 0;
const long b[]
	= { 0xd60,  0x3200,  0x1ca8, 0x74e2, 0x9c,   0x66e8, 0x5100,  0x14500,
		0x63b8, 0x49c6,  0xe0,   0x6200, 0x75e8, 0x57a6, 0xe8,    0x4300,
		0x4500, 0x63b8,  0x49ea, 0xc6,   0x548e, 0x22,   0x75e8,  0x57a6,
		0xc6,   0x2fae,  0x7486, 0x8a,   0xd72,  0x4f9c, 0x63c6,  0x4ea2,
		0x809c, 0x66e8,  0x5100, 0x5c00, 0x71a2, 0x51b8, 0x4e9e,  0xc6,
		0x6200, 0x70c4,  0x8022, 0x7d00, 0x439c, 0x63b8, 0x6ae0,  0x54c0,
		0x47e8, 0xe2,    0x5192, 0x6fc4, 0x4900, 0x60e8, 0x100ca, 0x14fe8,
		0x6000, 0x44e92, 0x6300, 0x57c4, 0xae,   0x4ecc, 0x62de,  0xc6,
		0xafae, 0x70c4,  0x9e,   0x4ec6, 0x639c, 0x5100, 0x4ecc,  0x74a2,
		0x9e,   0x54e8,  0x7100, 0x608a };
const long n = 9147811012615426336;
long
main ()
{
	if (i < 152)
	{
		char shifter;
		if (i % 2 == 0)
		{
			shifter = 8;
		}
		else
		{
			shifter = 1;
		}
		char adder1 = (b[i >> 1] >> shifter) & 64;

		char adder2 = (n >> (b[i >> 1] >> shifter)) & 63;

		char to_print = (char)adder1 + adder2;
		i++;
		main ();
		printf ("%c", to_print);
	}
	return 63;
}

Needless to say, the return value doesn’t matter any more. So you can change it to 0 or 69 depending upon your preferences.