I usually just use high power. I should try this sometime, although I don’t tend to have issues with stuff having cold spots. Something I think that helps is stirring stuff half way through and letting it sit for a min after it’s done.
Stirring definitely helps. The exact setting to use will vary depending on the microwave, what is being heated, and how much of it there is, but my usual go-to for a starting point on a full, regular-sized bowl or plate of food is: 3 minutes at 40%, remove and stir or flip as appropriate, then another 2-3 minutes at 30-40% depending on how hot it was. This approach will end up heating most things evenly without drying them out or burning anything.
Some things can be more sensitive, so if I’m ever unsure about what would be safe, I’ll start at 30% for 1 minute just to get a baseline for context. Below 30% is usually only useful for frozen things. Soups usually require several stirs - you don’t want to let it sit still for too long, or use too high a setting, or it can explode.
Yup, totally agree. Changed my microwaving habits a few years back. 3 minutes at about 600 watts works like a charm for just about everything. Add a minute or so if you’re heating soup or something else with a lot of mass/water.
I always did 2 minutes at maximum power previously and it was always like the surface of the sun on the outside and cold on the inside.
deleted by creator
I just started doubling time and using half power. It works sooo much better!
deleted by creator
I do this with Taco Bell leftovers. They all work outside of the actual tacos (specifically Doritos locos) most everything else comes out deliciously.
I still prefer to reheat crunchwraps in a skillet though.
deleted by creator
deleted by creator
deleted by creator
deleted by creator
I usually just use high power. I should try this sometime, although I don’t tend to have issues with stuff having cold spots. Something I think that helps is stirring stuff half way through and letting it sit for a min after it’s done.
Stirring definitely helps. The exact setting to use will vary depending on the microwave, what is being heated, and how much of it there is, but my usual go-to for a starting point on a full, regular-sized bowl or plate of food is: 3 minutes at 40%, remove and stir or flip as appropriate, then another 2-3 minutes at 30-40% depending on how hot it was. This approach will end up heating most things evenly without drying them out or burning anything.
Some things can be more sensitive, so if I’m ever unsure about what would be safe, I’ll start at 30% for 1 minute just to get a baseline for context. Below 30% is usually only useful for frozen things. Soups usually require several stirs - you don’t want to let it sit still for too long, or use too high a setting, or it can explode.
deleted by creator
deleted by creator
deleted by creator
No, if you’re using high power for anything longer than like 20 seconds to nuke a coffee or something, you’re microwaving wrong.
Most things are 👌 3:00 @ Power Level 6 (60% on, 40% off)
Yup, totally agree. Changed my microwaving habits a few years back. 3 minutes at about 600 watts works like a charm for just about everything. Add a minute or so if you’re heating soup or something else with a lot of mass/water.
I always did 2 minutes at maximum power previously and it was always like the surface of the sun on the outside and cold on the inside.
Mine only got 3 settings + thawing. Let me overclock this sucker to 200%.
Not if you use an inverter microwave.